DOMES, TABLETS, CONES AND GRANULES

Presentation
Characteristics
Composition | Forms | Density g/cm3 | Solidus-Liquidus | Comments | Packaging |
---|---|---|---|---|---|
Sn40 – Pb60 | Domes, tablets and granules | 9,72 | 183°C – 235°C | NC | Bulk |
Sn97 – Cu3 | Domes, tablets and granules | 7,33 | 227°C – 320°C | Lead-free* | Bulk |
Sn99 – Cu1 | Domes, tablets and granules | 7,3 | Eutectique 227°C | Lead-free* | Bulk |
Sn100 | Domes, tablets and granules | 7,28 | Eutectique 232°C | Lead-free* | Bulk |
Pure zinc | Tablets and granules | 7,14 | 419°C | NC | Bulk |
Pure silver | Tablets and granules | 10,49 | 962°C | NC | Bulk |
(*) Lead-free alloys – European standard no. 2000 / 53 / CE
Applications
- Electronics
- Electroplating
- Surface treatments
- Automotive
- Aeronautics
- Spatial
- Connectivity
- Electronics
- Metal braids
Implementation
The product safety datasheet below is available upon request to the METACONCEPT Group.
For tinning baths
The parts being assembled must be pre-treated (cleaned + fluxed). The temperature of the bath must be brought to around 20° above the liquidus temperature. A T010-type deoxidising power traps potential oxides present on the surface of the bath. Covering the bath with grease also helps to prevent the appearance of oxides.
For other applications, contact us. Our technical staff will be happy to send you the correct implementation procedure for your application.
Precautions for use
To prevent burns caused by the molten metal, it is advisable to wear a protective apron, shoes, gloves, helmet and glasses.
Do not smoke at the workstation.
The workstation must be well ventilated.
Wash your hands when leaving the workstation.
Comments:
Always use a flux suited to the intended use. Contact our technical department to ascertain which product is most suited to your application.
All of the information contained in this document is provided for informational purposes only and the METACONCEPT Group will not be held liable for it.